So how exactly does a governor work? The 'black box' still holds many mysteries…
Our experienced team can work with governors manufactured as early as the 1960s.
The SG is a hydraulic speed droop governor for control of small engines or turbines.…
We supply and overhaul a range of Woodward actuators for diesel and gas engines
Generally used for turbine applications, actuators provide the muscle for analogue…
We supply and overhaul a range of Woodward actuators for steam and gas turbines.
The UG group of governors consists of a line of pressure-compensated mechanical-hydraulic…
The UG-40 is most commonly used for speed or load control of larger dual fuel, diesel,…
The PG (Pressure-compensating) group of governors comprises a variety of pressure-compensating…
The PGA is much-like the standard PG model, however with the inclusion of an air…
The PG is an isochronous pressure-compensating governor usually used in turbine…
The 3161 is a mechanical governor designed for speed control for use predominantly…
The most common RE governors we work on are the RE 1100 series 2G 3G & 4G -…
Turbine and Engine Control Platform This is a low-cost alternative to general purpose…
The ATLAS control system represents a new generation of turbine and engine control…
The Woodward 723 Digital Control can be programmed to suit applications requiring…
The Woodward 2301D is a digital version of the 2301A that provides load sharing…
The Woodward 2301 Electronic Control is an analogue proportional system of engine…
Woodward Synchronisers Woodward provide a range of speed, phase…
A microprocessor-based complete generator load control and engine management package…
The EPG (Electric Powered Governor) is a simple governor system designed for precise…
The MicroNet™ Plus is a state-of-the-art digital control system designed with…
Originally designed to replace the functionality of the earlier 500-series digital…
The ProTech TPS is a safety PLC (programmable logic controller) with integrated…
The GII is an overspeed safety device designed to safely shutdown steam, gas, and…
Electronic, triple-redundant overspeed monitoring and emergency shutdown device.…
Digital Governors – programmable control system for steam turbine applications.…
The Peak 150 is a low cost, compact digital control for single-valve or single-valve…
The 2301D control is a digital version of the 2301. The 2301D-ST model is designed…
Current-to-Pressure Converter designed for positioning steam and fuel valves and…
A simple droop governor designed specifically for high-speed turbine control, and…
The Woodward PGA-EG is a PG governor with air speed setting and an electric actuator.…
EG (Electric Governor) The EG family consists of a series of electric governor/actuators…
A simple droop governor designed specifically for high-speed turbine control but…
The UG actuator is available in four sizes; 8, 15, 20 and 40 ft-lb versions the…
From overhaul kits to motors and drive shafts, we can supply your governing equipment.…
We can provide a range of Motors and accessories including the SMM40 Sawarmua Denki,…
We can provide all governor parts such as pilot valves, bushings, power pistons,…
We can provide a range of electrical connectors for all governor models. When requesting…
We can provide a range of complete booster servo motors, and coolers in addition…
We can provide a range of solenoid shutdowns in individual part form or complete…
A pilot operated, linear servo actuator used with a variety of Woodward electronic…
The TM family of actuators are torque motor controlled hydraulic actuators used…
We hold a wide range of basic renewable items in stock. When requesting a quotation…
We can provide a range of MPUs and Proximity Switches to meet any specific requirements.…
The PSG’s only difference from the SG is that it has a compensation system which…
We can provide and overhaul a wide range of controls from a number of manufacturers.
The 723PLUS Digital Control is an enhanced version of the 723. It manages and controls…
The SPM-D10 is a microprocessor based synchroniser designed for use on three phase…
The DSLC control is a microprocessor-based synchroniser and load control designed…
Designed to operate single-extraction and/or admission steam turbines of all sizes…
Much like the 2301-ST, the GT model is a field-configurable control, but designed…
The PG-EG is used on diesel engines or turbine prime movers. Due to the advantage…
The EGP range of actuators, for use on diesel, gas and petrol engines in addition…
The TG-13E and 17E actuators are self-contained electro-hydraulic actuators for…
The UG-25+ is a notably more enhanced and developed version of the UG actuator.…
We supply and overhaul a range of turbine controls from a number of manufacturers.
Based on the 505 and 505E but designed to control double automatic extraction/admission…
The TG611 is TG Governor with an integral overspeed test device. They are self-contained,…
The latest version of the 505.
